Log Home Building Packages
Posted by admin on Sunday, February 27, 2011 · Leave a Comment
Our Standard Log Home Building Package
Log Home Exterior Shell
Logs
- Logs custom cut, thru-bolts, foam tape, caulking tape, spikes, splines, dowels, etha-foam gasket, caulking.
Trusses And Parallam
- Custom designed for your area, cantilevered overhangs give more room for insulation and ventilation, various designs include commons, gables, scissors, girders, and drop trusses.
- Truss joists used in most cathedral ceilings.
- Laminated ridge beams and point-load lintels.
Beams And Posts
- Pine interior support posts, porch beams, porch posts, and screwjacks.
Windows And Exterior Doors
- Windows are wood casement with high efficiency, low E, Argon gas filled and detachable wood grilles.
- Doors are insulated steel, pre-hung in wood frame, with foam weatherstrip, and P.V.C. clad wood threshold.
- Sliding glass doors, picture windows, and special fixed lite windows do not have grilles.
- Garage doors are raised-cedar sectional, complete with hardware, 2×6 subjambs and gaskets for windows and door openings.
- Traditionally styled 1×4 custom trim.
- Premium grade caulking included for sealing around windows and doors.
Materials to Close in the Shell
Subfloor
- 3″ teleposts, sill gaskets and plates, air barrier, built-up beams, floor joists, crossbridging, strapping, adhesive, 5/8″ tongue and groove sheathing, nails.
Interior Walls 
- 2×4 and 2×6 studs with nailers and plates, door lintels.
Gable Ends (On Trusses)
- 7/16″ aspenite sheathing, air barrier, 1x 8 pine siding, staples, nails.
Gable Ends (On Frame)
- All materials for Gable ends (On Trusses) plus 2×6 studs and plates (2×4 if applicable.)
Roof (On Trusses)
- 2×4 or 2×6 lookouts, 1/2″ spruce sheathing, 1/2″ H-clips, and 2×6 subfascia, 50 lb. rolled roofing, ice and water shield, metal drip edge, 20 year asphalt shingles, roof vents, nails, 24″ valley flashing.
Roof (On Frame)
- All materials for Roof (On Trusses) plus 2×8 rafters, 2×10 build-up for insulation , framing for joining roofs.
Dormers (Shed and Gable)
- All materials as specified for Roof (On Frame) and Gable Ends (On Frame) plus 7″ galvanized step flashing, 6″ wall-to-roof flashing.
Soffits And Fascia
- 1×6 tongue and groove soffit, 2″ continuous vent strip, trim, 1×8 pine fascia, nails.
Exterior Door Locks
- One handleset for main entry and quality deadbolt locks for remaining exterior doors.
Tarping
- All logs and lumber are tarped to protect materials from the elements.